You Searched For: PE/LDPE/HDPE Stoppers


27  results were found

SearchResultCount:"27"

Sort Results

List View Easy View (new)

Rate These Search Results

Supplier: VWR Collection
Description: Stopper for test tubes Ø 12 to 16 mm, polyethylene, with tongues.

Supplier: VWR Collection
Description: Greaseless closure, which prevents ground joints from seizing. With inclined, circumferential sealing lips for better sealing and reduced risk of brea...

Supplier: VWR Collection
Description: These stoppers have a fluorocarbon film on the top and bottom. In addition, the enhanced lyophilisation stoppers are coated with a cross-linkable poly...

Catalog Number: (VWRI462-0585)
Supplier: VWR Collection
Description: Drain stoppers, VWR®
UOM: 1 * 5 items


Supplier: Simport Scientific
Description: PE Plug type push-in caps and 2-position snap caps are made of polyethylene for test tubes with outside diameters of 12 or 17 mm. Dual position caps o...

Supplier: KIMBLEKONTES
Description: HDPE, linear, ideal for flasks that are grounded to [ST] stopper dimensions.

Supplier: Bohlender
Description: For closing ground joint parts. With ground joint and sealing rings on the outside; knurled or hexagonal grip. Compared with glass stoppers, they are ...

Supplier: Simport Scientific
Description: HDPE. Fit tubes of 15 ml capacity and 17 mm Ø.

Supplier: Simport Scientific
Description: Designed for easy-on, easy-off use. Cap removal is simple and quick. FitsAllâ„¢ closure is ideal for recapping most 12 and 16 mm O.D. evacuated glass bl...

Supplier: Simport Scientific
Description: Ideal closures for glass and plastic reagent, sample and culture tubes, LDPE.

Supplier: Lenz Laborglas GmbH & CO.KG
Description: PE, white with red cover plate and octagonal head.

Supplier: BÃœRKLE
Description: Stopper made of PE, hollow with sealing rings and octagonal top.

Supplier: Corning
Description: These PYREX® No.13 stoppers are made from linear HDPE and have closed bottoms to conform to Standard Taper stopper dimensions.
Supplier: Corning
Description: PTFE. Ideal for flasks that are grounded to [ST] stopper dimensions.
Catalog Number: (GRANUWB-DS)
Supplier: GRANT INSTRUMENTS LTD.
Supplier Article Number:: UWB-DS
Description: Drain stoppers, recommended when using heat transfer beads, to prevent beads entering the drain hole.
UOM: 1 * 5 items


Supplier: COWIE
Description: PTFE. Stopper with flat head fit standard ground glass joints.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR at sales@sg.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +65 6505 0760.
1 - 16 of 27
no targeter for Bottom